Call us (504) 376-9792 | New Orleans, LA - Contact us to Book a Tour of Our Production Laboratory Today!

Vamo Battery Mod v2 Kit

$64.95

This is V2 Vamo Battery Mod. The Variable Voltage/Variable Wattage functionality allows the user to have the best possible vaping experience available regardless of varying atomizer/cartomizer etc. resistances.
The VM-Vamo VV/VW MOD is the quintessential design Variable Voltage model on the market today.  We offer this Unit in Stainless and Gunmetal finishes
The Kit includes:
  • Vamo Battery Mod tube Unit
  • Nightcore protected battery charger
  • 2 x 18650 IMR 2000mah Batteries
There are two modes of operation to help you set power output to the perfect level.
1) Variable voltage – adjust the voltage output for the VAMO from 3.0 to 6.0 volts in .1 volt increments. 2) Variable wattage – set the preferred wattage (from 3 to 15 watts) and the APV will adjust the voltage automatically no matter what atomizer you use.BEASTLY BECAUSE: This is the new version with an upgraded spring and metal buttons! Works like a charm, easy to operate, and offers unsurpassed value. For the price, this is simply one of the best functioning APV’s on the market! If you have been wanting to try a mod with both adjustable voltage AND power at an affordable price, look no further!NOTE: The VAMO allows the user to alternate methods used internally to calculate the voltage output. The default and recommended setting is RMS. RMS provides a more accurate voltage output. The VAMO may also run in Average (or Mean) mode. Average mode may result in output voltages than displayed. To switch modes, hold either the power up or power down button for 10 seconds. The display screen will display N01 for AVG mode or N02 for RMS mode. To change the mode, release the adjustment button then press and hold for an additional 10 seconds to change to the alternate mode.
Clear

Description

This is V2 Vamo Battery Mod. The Variable Voltage/Variable Wattage functionality allows the user to have the best possible vaping experience available regardless of varying atomizer/cartomizer etc. resistances.

The VM-Vamo VV/VW MOD is the quintessential design Variable Voltage model on the market today.
The new Vamo V2 Variable Voltage/Wattage PV is a advanced user device that carries some really neat various functions. These are the updated Version 2 featuring a updated battery spring, Metal buttons and a raised 510 sealed center connection, The use of drip shields, tanks and other attachments can be used without the need of any adapters. The device consists of 2 modes of use, Mode NO.1 is variable voltage setting, available to adjust increments .1 from 3v to 6v. Mode NO.2 is adjustable wattage mode from increments of .5 from 3.0 to 15 watts. You can switch the setting from volts to watts simply by pressing and holding down the two small center buttons together for 10 seconds. The Vamo V2 Variable Voltage/Wattage PV has a built in safety/surge protection and has a vent hole on the bottom end cap. The device takes a single 18650 size battery or it can also be used in its smaller setting with a 18350 as well by removing the bottom section tube. This newly released device has the ability to measure and display the resistance of your atomizers, cartomizers, and tanks on the fly. There is a  blue display meter readout that is very easy to read
  • Automatically detect and display the resistance of your atomizer/cartomizer.
  • Use 2 battery housings with an 18650 battery or 1 battery housing with an18350 battery.
  • 510/eGO thread works with almost all of the popular Cartomizers & Atomizers.
  • T2’s will still require a 510-eGo adapter.
  • The output Voltage or Wattage is variable 3-6V or 3-15W and has both AVG and RMS modes.
  • Press the + button for 3 seconds to view resistance in ohms.
  • Press the – button for 3 seconds to view battery power
  • Press the power button 5 times to turn it on / off the device
Here’s the cool stuff….
Dual Mode VV or VW
1: constant voltage. In this mode, APV adjusts from 3.0 to 6.0 Volts in .1 volt increments.
2: constant power. In this mode, APV adjusts from 3.0 to 15 Watts in .5 Watt increments.
Change modes by pressing both the  + and – buttons at the same time for 3 seconds.
More Features:
1) Short Circuit / Atomizer Protection.
2) Reverse Battery Protection.
3) Battery Monitoring / Over-Discharge Protection.
4) Amperage Limiting to 4.0amps.
5) Vent hole on the bottom of the device for added safety.
6) Hold the + or – button for 10 seconds to toggle between AVG (displayed as N01) and RMS (displayed as N02) modes
Specification of Vamo Mod:
Weight of device: 500G
Outer Diameter: 22mm
Inner diameter:18.5mm
Two 18350 batteries length: 136mm
One 18350 batteries length: 105mm
Battery: 18350 / 18650
Voltage: 3V-6V
Output current: 0-2.5A

Additional information

Color

,

Reviews

There are no reviews yet.

Be the first to review “Vamo Battery Mod v2 Kit”

Your email address will not be published. Required fields are marked *